Although entrepreneurs are familiar with the term working capital, all too often they fail to use its full potential. This is a mistake, because targeted management of their working capital needs can bring huge advantages, both financially and at an organisational level.

How a business approaches that in practice is obviously closely linked to its own specific situation and the sector in which it operates. Below is a number of general rules of thumb:

1. Analyse your business processes

A logical first step is a thorough analysis of your working capital needs, based on the cash conversion cycle. The idea is to clearly identify the following business processes:

• management of your customer payments
  How long does it take before your invoices are paid? Why do some invoices remain outstanding? How aware are you of your customers' financial situations?
• management of your supplier payments
  What payment terms are you getting? Do you get a discount if you pay quickly? Do you use advance financing?
• management of your production and stock
  How far can you deplete stocks without jeopardising production? Can you shorten the production time in order to reduce the amount of work in progress? Do you work according to the Just-in-Time system or have you decided to go for Economic Order Quantity?

You will then find out where there is room for improvement and how you can shorten the cash conversion cycle. The idea is to reduce your working capital needs and, by doing so – by dealing more frugally with the available capital – increase the return from your general management.

2. Collect faster and better

Adequate monitoring of your accounts receivable is crucial. Relatively small, obvious interventions can sometimes produce a surprisingly big benefit. Here are some tips:

• Monitor the quality of your invoices. A good invoice will quote a correct amount, a payment due date and will be received promptly by your customers.
• Invoice smaller amounts on a regular basis and avoid summary invoices where possible.
• Actively follow up outstanding invoices and find out why they remain unpaid. Is it down to the customer's financial situation or are there other factors to consider? Disagreement over the amount charged or problems with the delivery or sale often cause delays or result in non-payment. By aligning your accounts and services more efficiently, you end up with a win-win situation: satisfied customers and fewer disputed invoices.
• Solutions such as factoring or direct debit are a particularly profitable route to take. These lead to swifter collection without putting pressure on your customers or tightening up your payment terms, which is always delicate in a commercial relationship.

A clear picture
Without an overview of your accounts at home and abroad and of your incoming and outgoing payments, management of your working capital is virtually impossible. So, you need clear, immediately available information and reporting. Different solutions for electronic banking, reporting arrangements with your financial partners and efficient operation of your accounts and bookkeeping will help you considerably here.

Another profitable route is the centralisation of your cash and cash equivalents, which will dramatically simplify both the management and monitoring of these. Often this also offers numerous options in terms of fiscal optimisation.

3. Make optimum use of your supplier credit

Making sure your invoices are paid systematically in order to build up your number of days' supplier credit seems a painless and effective intervention, but it is the least you should do. After all, there is a good chance that the supplier will pass on the charge for the longer payment term in the price you pay for subsequent deliveries. There are a number of better alternatives:

• See whether or not it would benefit you to pay more quickly – in many cases early payment carries an attractive discount.
• Choose solutions that let you pay later without the other party being affected. For example, by relying on lines of credit or working via reverse factoring, whereby the supplier receives an advance on your payments from the bank.
• Negotiate with your supplier for an extension to your payment terms.

Ensure you have adequate protection
Being able to get hold of your funds quickly is just one aspect of optimum management of your working capital. Another is the assurance that your customers will actually pay, while at the same time your business must project confidence to (potential) trade partners. To that end, you can call on the various forms of documentary credit. By engaging credit insurers, you are also hedging the risk of the other party defaulting on payment.

Another important factor, certainly as far as international transactions are concerned, is the exchange rate risk. Although you may know when you are going to get paid, the exact amount depends on the exchange rate at the time of payment. Because the difference between a good and a less favourable exchange rate can have a big effect on your margin, you are better off hedging yourself against possible exchange rate fluctuations.
 

4. Get maximum performance from your stocks

The financial impact of your inventory control should not be underestimated. Just think about invoices that are outstanding after a faulty or late delivery, or holding on to too much stock of slow-selling products. The advantage of the latter is that you can always deliver promptly, but it does freeze a major part of your working capital. A few guidelines:

• Check your stocks and prices regularly, preferably using a package like Enterprise Resource Planning (ERP) or a web-based application with direct link to your opposite parties.
• A warehouse management system will allow you to retain a good overview of your quick and slow-selling products, so you can adjust your stock accordingly.
• Keep your finger on the pulse of the market so that you can correctly assess demand, and thus avoid stock surpluses or deficits.
• You can also choose a radically different course and outsource your stock management to a logistics service provider.
• Use stock financing to keep cash and cash equivalents available for other purposes.
• Hedge yourself against price fluctuations on the raw materials markets, to protect your margin.

An exercise in balance

Optimising your working capital needs is therefore a continual exercise in balance between your accounts receivable, accounts payable and inventory control. It is a stiff challenge, but essential if you are to increase your financial might and steal the march on your competitors. Get your working capital to perform!

Working capital, also known as net operating capital, presents a picture of the operational liquidity of a business. But there is more to it than meets the eye.

The success of a business actually depends to a significant extent on how it deals with its working capital needs.

The difference between working capital and working capital needs

Within the financial analysis, working capital is just one of the indicators that present a picture of the operational liquidity of a business. It not only affects general management, but also the access to bank credit or the valuation of the business, for example. This is calculated as follows:

Equity capital and other resources in the long term - fixed assets

This allows you to see whether sufficient long-term funds are available to finance the production chain. Where there is a positive result that is indeed the case, whereas with a negative result it is actually the production chain that must safeguard the long-term financing.

It is therefore useful to calculate the working capital needs as well:

Current assets (excluding cash) - current liabilities (excluding financial liabilities)

The result shows the amount the business needs in order to finance its production chain, and may be both positive and negative:

• where working capital needs are positive, the commercial debts no longer cover the short-term assets (excluding the financial). In that case, a business can rely on its working capital. If this is insufficient, it will need additional financing for its operational cycle in the short term;
• where working capital needs are negative, a business can meet its short-term liabilities without any problem. Nevertheless, it is advisable to reduce working capital needs (further).

In short, working capital presents a picture of the operational liquidity of a business, whereas working capital needs represent the amount the business needs in order to finance its production chain.

In other words, it boils down to limiting working capital needs as far as possible, thus increasing liquidity. This is crucial, especially in times of economic or financial difficulty. After all, customers tend to pay later then, while your stocks are increasing and your suppliers are imposing stricter payment terms. As a result, more and more working capital gets 'frozen' in your operating cycle, precisely when circumstances make it more difficult to attract additional financing.

Conclusion

Optimising working capital is not only a question of long-term considerations. In the short term, too, the business can release cash that is not being used optimally, or is being used unnecessarily, more specifically in the purchasing, production and sales processes within the operating cycle.

The working capital and the working capital needs must, above all, be geared effectively to each other. The working capital needs must be structurally less than the working capital itself, preferably with an extra buffer. However, there is no mathematical truth regarding the amount of working capital and working capital needs. Sector, activity and business model can affect this, for example.

A good barometer of how great the demands of your operating cycle are on your working capital is the 'cash conversion cycle'. This is expressed in number of days and shows how long money is tied up in your business's purchasing, production and sales processes.

The calculation of the cash conversion cycle is based on:

• the number of days' customer credit (DSO – Days Sales Outstanding):
  the average number of days that your business must wait for payment after a product or service is delivered.
• the number of days' stock rotation (DIO – Days Inventory Outstanding):
  the average number of days that your business needs to convert stock into a sale.
• the number of days' supplier credit (DPO – Days Payable Outstanding):
  the average number of days that your business needs to pay suppliers.

The shorter the cycle, the less capital is held in the business process, which allows you to meet your short-term liabilities and expand your activities.

Simplified presentation of the cash conversion cycle

 

 

 

 

Belgium’s three regions provide a range of grants for companies and self-employed people making investments. Our experts can help you make sense of the situation and submit your application.

The terms and amounts of investment grants vary greatly from one region to another. The applicable rules depend on the location of the operational entity making the investments. The company’s registered office is not relevant and can be located in any country. You should also bear in mind that applying for a grant is still a fairly cumbersome administrative process. That’s why our experts take care of all the steps, from submitting the grant application to collecting the grant money.

Flanders: a range of grants

Various types of grants are available in Flanders, the most important of which are support for strategic transformations, the ecology bonus, strategic ecological support, the SME e-wallet and the SME growth subsidy.

Each type of support targets different types of investment and different companies. Subsidy levels also vary widely, from 8% for a strategic investment by a large company to 50% for consultancy fees paid by an SME.

Our experts can help you identify subsidy opportunities and then arrange for you to meet a specialist from VLAIO, the Flemish Agency for Innovation and Entrepreneurship, who will then help you with the rest of your application.

Wallonia: traditional and ecological aid

In Wallonia, investment grants are reserved for companies operating in a limited number of eligible sectors. Excluded activities include retail, transport and the liberal professions.

The terms and conditions also differ according to the size of the company. Small businesses must invest a minimum of €25,000. Large companies need to reach higher thresholds and invest in a development zone.

Examples of eligible business investments include buying/building a property, buying land and buying new business equipment.

The basic grant varies from 4% to 6%, but can be higher if the applicant creates jobs, takes an innovative approach or diversifies abroad, for example. A larger grant, up to 20%, may be obtained for projects that promote the sustainable use of energy and environmental protection.

Please note that it is essential to submit the request before any firm investment commitment is made: investments for which you have already accepted a quote can no longer be subsidised.

Our experts can guide your company through the entire process.

Brussels: the most generous

The Brussels subsidy for investments in goods, property or works is open to most sectors. In total, around 80% of the capital's economic activities are eligible for grants. The two main exceptions are education and real estate.

To qualify for a grant, the investment project must be worth at least €10,000 for a start-up business and at least €15,000 in other cases, depending on the size of the business. In addition, it must aim to develop or improve an existing activity: simple replacement expenditure does not qualify.

The aid can amount to up to 30% of the investment, although the average is 12.5%. The level of subsidy depends on a number of criteria, such as whether the company is a start-up and whether the investment will increase the number of people employed by more than 30%.

Over the course of 2024, reforms to the aid system will increase incentives for sustainable and circular economy projects.

Please note that it is essential to submit the request before any firm investment commitment is made: investments for which you have already accepted a quote can no longer be subsidised.

Our experts can guide your company through the entire process.

How can you keep your working capital healthy while incorporating the requisite financial flexibility? Factoring helps you to finance your cash requirements in a proper, timely and suitable way.

Securing liquidity is the key to financing your working capital requirements and keeping your business running smoothly at all times. That's exactly what factoring offers.It is a structural solution for optimising working capital. In the video below (in Dutch) in less than half an hour you will gain a clear picture of what factoring has to offer.

If you prefer to watch the video in French, click here.

Factoring: a tailored structural solution

In exchange for transferring your invoices to an external factoring company, you can count on fast, flexible financing, monitor the collection of your invoices, and protect yourself against potential bankruptcy among your customers. Each factoring solution is tailored to fit the needs of your business. This includes companies operating at international level. In Belgium, one in six companies currently outsource their invoices to an external factoring company. The same trend is evident in other European countries.